Allure Ultra Vinyl Plank Flooring Installation Instructions

Essential Aspects of Allure Ultra Vinyl Plank Flooring Installation Instructions

Installing Allure Ultra vinyl plank flooring is a relatively straightforward process, but it does require some preparation and attention to detail. By following these instructions carefully, you can ensure a professional-looking and long-lasting installation.

Tools and Materials

Before you begin, gather the following tools and materials:

Allure Ultra vinyl plank flooring
Underlayment (optional)
Tapping block
Utility knife
Measuring tape
Pencil

Preparation

1. Remove existing flooring: If there is existing flooring in the room, it must be removed before installing the Allure Ultra vinyl plank flooring.

2. Prepare the subfloor: The subfloor must be clean, level, and dry. If there are any uneven areas, they should be leveled with a self-leveling compound.

3. Install underlayment (optional): An underlayment can provide additional soundproofing and insulation. If you choose to install an underlayment, follow the manufacturer's instructions for installation.

Installation

1. Plan the layout: Before starting the installation, plan the layout of the planks to minimize waste. Start by measuring the room and determining the center point.

2. Install the first row: Begin installing the planks in the center of the room, working your way out. Use the tapping block to tap the planks into place, ensuring that they are flush with each other.

3. Continue installing planks: Continue installing the planks in rows, working your way from the center to the edges of the room.

4. Trim the planks: As you reach the edges of the room, you will need to trim the planks to fit. Use a utility knife to score the planks and then snap them off.

5. Install the last row: The last row of planks may need to be trimmed to fit. Use a utility knife to score the planks and then snap them off.