How To Install Trafficmaster Allure Plank Flooring

How to Install Trafficmaster Allure Plank Flooring

Trafficmaster Allure plank flooring is a popular choice for homeowners due to its durability, ease of installation, and stylish appearance. If you're planning to install Trafficmaster Allure plank flooring in your home, here's a step-by-step guide to help you get the job done right.

Materials You'll Need:

Trafficmaster Allure plank flooring
Underlayment (optional)
Tape measure
Pencil
Utility knife
Tapping block
Pull bar

Step 1: Prepare the Subfloor

Before you begin installing the flooring, it's important to make sure the subfloor is clean, dry, and level. If the subfloor is not level, you may need to use a self-leveling compound to smooth it out.

Step 2: Install the Underlayment (Optional)

While not required, installing an underlayment can help to reduce noise and provide additional cushioning underfoot. If you choose to use an underlayment, simply roll it out over the subfloor and tape the seams together.

Step 3: Measure and Cut the Planks

Measure the length and width of the room and cut the planks accordingly. Use a utility knife to score the planks and then snap them apart. Be sure to cut the planks slightly shorter than the actual length of the room to allow for expansion.

Step 4: Start Installing the Planks

Start installing the planks in a corner of the room. Place the first plank along the wall, leaving a small gap for expansion. Tap the plank into place using a tapping block and hammer. Continue installing the planks row by row, staggering the joints for strength.

Step 5: Lock the Planks Together

Once you have installed the first row of planks, you can start locking the planks together. To do this, simply insert the tongue of one plank into the groove of the next plank. Use a tapping block and hammer to tap the planks together until they are locked securely.

Step 6: Continue Installing the Planks

Continue installing the planks until you reach the opposite wall. If you need to cut the last plank to fit, measure the remaining space and cut the plank accordingly. Tap the plank into place and lock it into the previous plank.

Step 7: Install the Baseboards

Once the flooring is installed, you can install the baseboards. Baseboards help to cover the gap between the flooring and the wall, and they also add a finished look to the room.

Step 8: Enjoy Your New Flooring!

Congratulations! You have now successfully installed Trafficmaster Allure plank flooring. Enjoy the beauty and durability of your new flooring for years to come.