Wood Block Flooring Installation

Wood Block Flooring Installation: A Step-by-Step Guide

Installing wood block flooring is a relatively simple process that can be completed by do-it-yourselfers with some basic tools and skills. However, it is important to pay attention to detail and follow the instructions carefully to ensure a professional-looking finish.

Step 1: Preparation

Before you begin, it is important to prepare the subfloor. The subfloor should be level, smooth, and free of debris. If the subfloor is not level, you may need to level it using a self-leveling compound.

Step 2: Laying the Blocks

Once the subfloor is prepared, you can begin laying the blocks. Start by laying a row of blocks along the edge of the room. Use a spacer to ensure that the blocks are evenly spaced. Once the first row is complete, continue laying rows of blocks until the entire floor is covered.

Step 3: Nailing the Blocks

Once the blocks are laid, you will need to nail them down. Use a flooring nail gun to nail the blocks into place. Be sure to countersink the nails slightly below the surface of the wood.

Step 4: Sanding and Finishing

Once the blocks are nailed down, you can sand and finish the floor. Start by sanding the floor with a fine-grit sandpaper. Once the floor is sanded, you can apply a finish of your choice. You can choose from a variety of finishes, including polyurethane, wax, or oil.

Tips

Here are a few tips for installing wood block flooring:

Use a level to ensure that the subfloor is level before you begin laying the blocks.
Use a spacer to ensure that the blocks are evenly spaced.
Countersink the nails slightly below the surface of the wood.
Sand the floor with a fine-grit sandpaper before you apply a finish.