Tranquility Vinyl Plank Flooring Installation Instructions

Tranquility vinyl plank flooring is a popular choice for homeowners due to its durability, water resistance, and ease of installation. With proper preparation and attention to detail, installing this type of flooring can be a manageable DIY project. The following instructions will guide you through the installation process, ensuring a beautiful and long-lasting floor.

Prepare the Subfloor

Before installing Tranquility vinyl plank flooring, it is crucial to ensure a smooth, level, and clean subfloor. Any imperfections in the subfloor can show through the vinyl planks. If you have a concrete subfloor, it should be free of cracks, unevenness, and debris. For wooden subfloors, check for squeaks and loose boards, and repair any damage before proceeding.

To check for levelness, use a level across the surface of the subfloor. You can use a leveling compound to address any significant imperfections. If you are installing over a wood subfloor, ensure that the boards are securely fastened and that there are no gaps or cracks between the planks. It's also essential to create a moisture barrier by applying a moisture-resistant sheet membrane.

Acclimate the Flooring

Before installation, it is vital to acclimate the Tranquility vinyl plank flooring to the room's temperature and humidity. Acclimating the flooring ensures that it expands and contracts at the same rate as the subfloor after installation, preventing warping or buckling.

Open the boxes of Tranquility vinyl plank flooring and lay them out in the room at least 48 hours before installation. Ensure that the planks are spread out evenly and not stacked on top of each other. This allows the flooring to adjust to the room's environment.

Install the Vinyl Plank Flooring

Once the subfloor is prepared and the flooring is acclimated, you can begin the installation process. Follow these steps for a successful installation:

Determine the Starting Point:

Begin installing planks in the corner of the room, working your way outwards. 2.

Lay the First Row:

Place the first plank against the wall, leaving a ¼-inch expansion gap. Use spacers to maintain this gap. 3.

Align Subsequent Rows:

For the second row, offset the planks for a staggered appearance. Ensure the planks are tightly locked together, clicking them into place. 4.

Trim Planks:

For the final row, measure the remaining space and trim the planks accordingly. Use a utility knife to score along the plank and snap it to fit. 5.

Secure Edges:

Use transition strips for doorways and other areas where the flooring meets different surfaces. These strips help create a smooth, seamless transition. 6.

Clean Up:

Once installation is complete, sweep and mop the floor to remove any debris or dust. 7.

Apply Finish:

Apply a sealant or polyurethane coating to protect the flooring from scratches and stains.

Installing Tranquility vinyl plank flooring is a straightforward process that can be completed by most homeowners. By following these instructions and paying close attention to detail, you can create a beautiful and long-lasting floor that will enhance the appearance of your home.