Trafficmaster Allure Vinyl Flooring Installation

Trafficmaster Allure Vinyl Flooring Installation: A Comprehensive Guide

Trafficmaster Allure vinyl flooring is an excellent choice for those seeking a durable, low-maintenance flooring solution. With a plank-like appearance and easy installation, this flooring offers both aesthetics and practicality.

Tools and Materials Needed

Before starting the installation, ensure you have the necessary tools and materials:

Utility knife or flooring knife
Straight edge or ruler
Measuring tape
Allure vinyl flooring planks
Underlayment (optional)
Expansion gaps

Preparing the Subfloor

Proper subfloor preparation is essential for a successful installation. The subfloor must be level, smooth, and free of debris. If the subfloor is uneven, use a leveling compound to smooth it out.

Installing the Underlayment (Optional)

While not mandatory, installing an underlayment beneath the vinyl flooring provides additional comfort and noise reduction. Ensure the underlayment is laid flat and secured with tape or glue.

Installing the Vinyl Planks

Start the installation along the longest wall in the room. Position the first plank and secure it using the locking system. Continue installing the planks row by row, ensuring they are tightly interlocked.

Cutting the Vinyl Planks

To fit the planks around obstacles or in corners, you may need to cut them. Use a utility knife or flooring knife to carefully score the plank and snap it along the score line.

Installing the Expansion Gaps

Expansion gaps are necessary to allow the flooring to expand and contract with changes in temperature. Leave a small gap around the perimeter of the room and around any fixtures or obstacles.

Finalizing the Installation

Once all the planks are installed, use a rolling pin or heavy object to roll over the flooring to ensure all the seams are tightly secured. Remove any excess underlayment or expansion gaps. Clean the flooring with a damp mop to remove any dust or debris.

Tips for a Successful Installation

Acclimate the vinyl flooring to the room temperature for 24-48 hours before installing.
Follow the manufacturer's instructions carefully.
Use a sharp blade to cut the planks for a clean finish.
Ensure the locking system is engaged completely.
Allow the flooring to rest for at least 24 hours before using it heavily.

By following these steps, you can successfully install Trafficmaster Allure vinyl flooring, creating a durable and stylish flooring solution that will enhance your home for years to come.