Installing Laminate Flooring Around Door Frames

Installing Laminate Flooring Around Door Frames: A Comprehensive Guide

Installing laminate flooring around door frames is an important step in the overall flooring process. By carefully following the correct steps, you can achieve a professional-looking finish that will enhance the beauty of your home.

Here are the essential aspects of installing laminate flooring around door frames:

1. Measure and Cut the Planks

Begin by measuring the width of the door frame and cutting the laminate planks to the appropriate length. Use a miter saw to create 45-degree angles on the ends of the planks that will butt up against the door frame.

2. Remove the Existing Threshold

If there is an existing threshold at the bottom of the door frame, remove it using a pry bar or utility knife. This will create a space for the laminate flooring to be installed.

3. Install the Transition Strip

Install a transition strip along the bottom of the door frame to provide a smooth transition from the laminate flooring to the other flooring surface. Secure the transition strip with nails or screws.

4. Cut the Underlayment

Cut the underlayment to fit around the door frame. Make sure that the underlayment extends slightly beyond the ends of the laminate planks.

5. Install the Laminate Planks

Start installing the laminate planks by placing them against the transition strip. Use a tapping block and hammer to gently tap the planks into place. Continue installing the planks until you reach the other side of the door frame.

6. Trim the Planks

Once the planks are installed, use a jigsaw or utility knife to trim any excess material that extends beyond the door frame. Be careful not to damage the door frame.

7. Install the Trim

Install baseboards or other trim around the door frame to conceal the edges of the laminate flooring. Secure the trim with nails or screws.

Tips for Success

Use a level to ensure that the laminate planks are installed evenly.
Leave a small gap between the laminate flooring and the door frame to allow for expansion and contraction.
Use a moisture barrier underlayment to protect the laminate flooring from moisture.
Follow the manufacturer's instructions for installing the specific type of laminate flooring you are using.