Installing Armstrong Luxe Plank Flooring

Installing Armstrong Luxe Plank flooring is a relatively straightforward process that can be completed in a few hours. However, there are a few key steps that you need to follow in order to ensure a successful installation.

1. Preparation

The first step is to prepare the subfloor. The subfloor must be level, smooth, and dry. If the subfloor is not level, you will need to level it using a self-leveling compound. If the subfloor is not smooth, you will need to sand it down. And if the subfloor is not dry, you will need to allow it to dry completely before installing the flooring.

2. Installation

Once the subfloor is prepared, you can begin installing the flooring. The first step is to lay out the planks in the desired pattern. Once the planks are laid out, you can start gluing them down to the subfloor. Use a trowel to apply the glue to the subfloor, and then press the planks into place. Be sure to stagger the joints between the planks, and to leave a small gap between the planks and the walls.

3. Trimming

Once the flooring is glued down, you will need to trim the edges of the planks. Use a sharp utility knife to score the planks, and then snap them off. Be sure to wear safety glasses when trimming the planks.

4. Finishing

The final step is to finish the flooring. This can be done by applying a sealant or a finish. A sealant will protect the flooring from stains and scratches, while a finish will give the flooring a glossy or matte look.

Tips