How To Lay Wood Flooring On Stairs

Installing wood flooring on stairs can seem like a daunting task, but with the right preparation and a little patience, you can achieve professional-looking results. Here's a step-by-step guide to help you through the process:

Materials You'll Need

Wood flooring planks
Underlayment
Stair nosing
Treads and risers
Wood glue
Nails or screws
Hammer or nail gun
Saw
Tape measure
Level
Carpenter's pencil

Step 1: Prepare the Stairs

Remove any old flooring or carpet from the stairs. Ensure the stairs are level and in good condition. Install underlayment on the treads and risers to provide a smooth surface for the flooring.

Step 2: Install the Stair Nosing

Cut the stair nosing to the correct length and secure it to the front edge of each tread. Use wood glue and nails or screws to ensure a secure fit.

Step 3: Install the Treads

Measure and cut the wood flooring planks to fit each tread. Apply wood glue to the underside of the planks and lay them in place. Use a hammer or nail gun to secure the planks.

Step 4: Install the Risers

Measure and cut the wood flooring planks to fit each riser. Apply wood glue to the underside of the planks and lay them in place. Use a level to ensure they are level, and use nails or screws to secure them.

Step 5: Finishing Touches

Once all the wood flooring is installed, sand any uneven edges or gaps. Apply a stain or finish to protect the flooring and enhance its appearance. Allow the finish to dry completely.