How To Lay Vinyl Flooring On Plywood

How to Lay Vinyl Flooring on Plywood

Vinyl flooring is a great choice for any room in your home, and it's especially well-suited for areas with high traffic or moisture. It's also relatively easy to install, even for DIYers. Here are the steps on how to lay vinyl flooring on plywood:

1. Prepare the subfloor

The first step is to prepare the subfloor. Make sure it is clean, dry, and level. If the subfloor is not level, you will need to level it using a self-leveling compound. Once the subfloor is level, you can install an underlayment. An underlayment will help to cushion the vinyl flooring and reduce noise.

2. Install the vinyl flooring

Once the underlayment is installed, you can begin installing the vinyl flooring. Start by laying out the planks in the desired pattern. Once you have laid out the planks, you can start gluing them down. Use a trowel to apply the glue to the subfloor, and then press the planks into place. Make sure to stagger the joints between the planks.

3. Trim the edges

Once the vinyl flooring is installed, you will need to trim the edges around the room. Use a utility knife to score the vinyl flooring along the edge, and then snap it off. You can also use a power saw to trim the edges, but be careful not to cut into the subfloor.

4. Seal the edges

Once the edges are trimmed, you will need to seal them. Apply a bead of caulk around the edges of the room, and then smooth it out with your finger. The caulk will help to seal the edges and prevent moisture from getting underneath the vinyl flooring.

5. Enjoy your new floor!

Once the caulk is dry, your new vinyl floor will be complete. Enjoy your new floor for years to come!

Tips for laying vinyl flooring on plywood

Use a sharp utility knife to score the vinyl flooring. A dull knife will tear the vinyl.
Be careful not to cut into the subfloor when trimming the edges of the vinyl flooring.
Apply a bead of caulk around the edges of the room to seal the edges and prevent moisture from getting underneath the vinyl flooring.
Allow the caulk to dry completely before walking on the new floor.