How To Lay Laminate Hardwood Flooring On Stairs

Laminate hardwood flooring is a popular choice for homeowners who want the look of hardwood without the high cost. It is also a relatively easy material to install, even on stairs. With a little planning and preparation, you can have your new laminate stairs installed in no time.

Materials You Will Need

Laminate hardwood flooring
Underlayment
Stair treads
Stair risers
Bullnose trim
Quarter-round trim
Construction adhesive
Flooring nails
Nail gun
Miter saw
Table saw
Jigsaw
Hammer
Level
Tape measure
Pencil

Step 1: Prepare the Stairs

The first step is to prepare the stairs for the new flooring. This involves removing any existing flooring, leveling the stairs, and installing underlayment.

To remove the existing flooring, you will need to pry it up with a pry bar. Once the old flooring is removed, you will need to level the stairs. This can be done with a self-leveling compound or by shimming the stairs.

Once the stairs are level, you will need to install underlayment. Underlayment helps to protect the laminate flooring from moisture and damage. It also helps to reduce noise.

Step 2: Install the Laminate Hardwood Flooring

Once the stairs are prepared, you can begin installing the laminate hardwood flooring. Start by installing the stair treads. The stair treads should be cut to fit the size of your stairs. You can cut the stair treads with a miter saw or a table saw.

Once the stair treads are cut, you will need to apply construction adhesive to the back of each tread. Then, place the treads in place on the stairs. Use a level to make sure that the treads are level.

Once the stair treads are installed, you can install the stair risers. The stair risers should be cut to fit the height of your stairs. You can cut the stair risers with a miter saw or a table saw.

Once the stair risers are cut, you will need to apply construction adhesive to the back of each riser. Then, place the risers in place on the stairs. Use a level to make sure that the risers are level.

Step 3: Install the Trim

Once the laminate hardwood flooring is installed, you will need to install the trim. The trim will help to finish the look of the stairs and protect the flooring from damage.

The bullnose trim should be installed on the edge of the stairs. The quarter-round trim should be installed around the perimeter of the stairs.

To install the trim, you will need to apply construction adhesive to the back of each piece of trim. Then, place the trim in place on the stairs. Use a hammer to nail the trim in place.

Step 4: Finishing Touches

Once the trim is installed, you can add the finishing touches to your new laminate hardwood stairs. This may include adding a stair runner or painting the stairs.

A stair runner is a great way to add a touch of style to your stairs. It can also help to protect the flooring from wear and tear.

If you choose to paint your stairs, be sure to use a paint that is specifically designed for laminate flooring.

Conclusion

Installing laminate hardwood flooring on stairs is a relatively easy project that can be completed in a few hours. With a little planning and preparation, you can have your new laminate stairs installed in no time.