How To Lay Laminate Flooring Under Door Jambs

How to Install Laminate Flooring Under Door Jambs

Installing laminate flooring can be a great way to update your home's interior. However, one of the trickiest parts of the process can be figuring out how to install the flooring under door jambs. Here's a step-by-step guide to help you get the job done right.

Gather Your Tools and Materials

Before you start, you'll need the following tools and materials:

Laminate flooring
Underlayment
Saw
Measuring tape
Pencil
Hammer or nail gun
Trim nails
Caulk gun
Caulk

Prepare the Door Jamb

The first step is to prepare the door jamb. You'll need to remove the baseboard and any other trim that's in the way. Once the trim is removed, you can use a saw to cut the bottom of the door jamb so that it's flush with the floor.

Install the Underlayment

Once the door jamb is prepared, you can install the underlayment. The underlayment will help to protect the floor from moisture and noise. To install the underlayment, simply roll it out over the floor and cut it to size.

Install the Laminate Flooring

Now you're ready to install the laminate flooring. Start by laying the first row of flooring along the wall. Make sure that the flooring is flush with the wall and that there are no gaps between the planks. Once the first row is installed, you can continue laying the flooring in rows until you reach the door jamb.

Cut the Flooring to Fit

When you reach the door jamb, you'll need to cut the flooring to fit. To do this, measure the distance between the edge of the flooring and the door jamb. Then, use a saw to cut the flooring to size. If the flooring is just a little bit too long, you can use a hammer or nail gun to tap it into place.

Caulk the Gaps

Once the flooring is installed, you'll need to caulk the gaps between the flooring and the door jamb. This will help to keep water and dirt from getting underneath the flooring. To caulk the gaps, simply apply a bead of caulk to the gap and smooth it out with your finger.

Reinstall the Trim

The final step is to reinstall the trim. To do this, simply nail the trim back into place. Make sure that the trim is flush with the flooring and that there are no gaps between the trim and the wall.

Conclusion

Installing laminate flooring under door jambs can be a tricky process, but it's definitely possible to do it yourself. By following these steps, you can get the job done right and have your new flooring looking its best.