How To Lay Laminate Flooring Against Tile

Laminate flooring is a popular choice for homeowners because it is durable, easy to clean, and relatively inexpensive. It can be installed over a variety of subfloors, including tile. However, there are a few things to keep in mind when installing laminate flooring over tile.

First, the tile must be clean, dry, and level. Any unevenness in the tile will telegraph through the laminate flooring, so it is important to make sure that the tile is as smooth as possible. You can use a level to check for any high or low spots, and then use a sander or grinder to level them out.

Once the tile is clean and level, you can begin installing the laminate flooring. Start by laying out the first row of planks along the longest wall in the room. Make sure that the planks are flush with the wall and that there are no gaps between them. You can use a spacer to help you keep the planks evenly spaced.

Once the first row is in place, you can continue laying the rest of the floor. Work your way across the room, row by row, until the entire floor is covered. Be sure to stagger the joints between the planks so that they do not line up directly with each other. This will help to make the floor more durable and less likely to buckle or warp.

Once the floor is installed, you can trim the edges around the perimeter of the room. You can use a utility knife or a saw to cut the planks to size. Be sure to leave a small gap between the flooring and the wall to allow for expansion and contraction.

Finally, you can install the baseboards and moldings to finish off the floor. Baseboards will help to hide the expansion gap and give the floor a finished look.

Installing laminate flooring over tile is a relatively easy project that can be completed in a weekend. By following these steps, you can ensure that your floor is installed correctly and will last for many years to come.