How To Install Trafficmaster Laminate Plank Flooring

How to Install Trafficmaster Laminate Plank Flooring

Trafficmaster laminate plank flooring is a durable and affordable flooring option that is easy to install. With a few simple tools and a little bit of time, you can have a beautiful new floor in no time.

Materials You'll Need

Before you start, you'll need to gather the following materials:

Laminate plank flooring
Underlayment
Moisture barrier
Tapping block
Pull bar
Saw
Tape measure
Pencil

Step 1: Prepare the Subfloor

The first step is to prepare the subfloor. This means removing any old flooring, cleaning the subfloor, and repairing any damaged areas. If the subfloor is not level, you will need to level it using a self-leveling compound.

Step 2: Install the Underlayment

Once the subfloor is prepared, you can install the underlayment. The underlayment will help to cushion the flooring and reduce noise. Roll out the underlayment over the subfloor and tape the seams together.

Step 3: Install the Moisture Barrier

The next step is to install the moisture barrier. The moisture barrier will help to protect the flooring from moisture damage. Roll out the moisture barrier over the underlayment and tape the seams together.

Step 4: Install the First Row of Planks

Now you can start installing the laminate planks. Start by installing the first row of planks along the longest wall in the room. Use a tapping block to tap the planks together tightly. Make sure to leave a small gap between the planks and the wall to allow for expansion.

Step 5: Continue Installing the Planks

Continue installing the planks in rows, working your way across the room. Use a pull bar to help you pull the planks together tightly. If you need to cut a plank to fit, use a saw to make the cut. Make sure to cut the plank at a 45-degree angle so that it fits snugly against the wall.

Step 6: Install the Last Row of Planks

Once you have installed all of the planks except for the last row, you will need to cut the last row of planks to fit. To do this, measure the distance from the wall to the last row of planks. Cut the planks to the appropriate length and then tap them into place.

Step 7: Install the Baseboards

The final step is to install the baseboards. The baseboards will help to cover the gap between the flooring and the wall. Install the baseboards using a nail gun or a hammer and nails.