How To Install Trafficmaster Flooring

How to Install Trafficmaster Flooring

Trafficmaster flooring is a popular choice for its durability, affordability, and ease of installation. If you're considering installing Trafficmaster flooring in your home, here are the essential steps to follow:

1. Preparation

Before you begin installing the flooring, it's important to prepare the subfloor. The subfloor should be level, smooth, and free of any debris. If the subfloor is not level, you may need to use a self-leveling compound to smooth it out. If there are any holes or cracks in the subfloor, you should fill them with a patching compound.

2. Layout

Once the subfloor is prepared, you can begin laying out the flooring. Start by measuring the room and determining the center point. Then, snap a chalk line down the center of the room. This will help you to keep the flooring straight as you install it.

3. Installation

To install the Trafficmaster flooring, you will need a flooring cutter, a hammer, and a nail set. Start by cutting the first piece of flooring to size. Then, place the flooring on the subfloor and tap it into place with the hammer. Use the nail set to drive the nails into the flooring. Continue installing the flooring, working your way from the center of the room outward.

4. Trim

Once the flooring is installed, you will need to trim the edges to fit the room. To do this, you can use a utility knife or a circular saw. Be careful not to cut the flooring too short. It's always better to cut it a little too long and then trim it down to size.

5. Finishing

Once the flooring is trimmed, you can finish it by applying a sealant. The sealant will help to protect the flooring from wear and tear. You can apply the sealant with a brush or a roller. Allow the sealant to dry completely before walking on the flooring.

Additional Tips

Here are a few additional tips for installing Trafficmaster flooring:

Use a sharp flooring cutter to cut the flooring. A dull cutter will make it more difficult to cut the flooring cleanly.
Tap the flooring into place with a hammer. Do not use a nail gun to install the flooring. This could damage the flooring.
Use a nail set to drive the nails into the flooring. This will help to keep the nails from popping up.
Apply the sealant to the flooring with a brush or a roller. Allow the sealant to dry completely before walking on the flooring.