How To Install Trafficmaster Allure Ultra Vinyl Plank Flooring

How to Install Trafficmaster Allure Ultra Vinyl Plank Flooring: A Step-by-Step Guide

Transform your flooring with Trafficmaster Allure Ultra Vinyl Plank Flooring! Its exceptional durability and stylish designs will elevate any space. Installing this flooring is a DIY-friendly project with careful planning and attention to detail. Here's a comprehensive guide to help you achieve a flawless installation:

1. Preparation

Begin by removing existing flooring and ensuring a flat, smooth subfloor. Install an underlayment to enhance sound absorption and provide a comfortable walking surface. Acclimate the vinyl planks to the room temperature for at least 24 hours before installation.

2. Layout and Dry Fit

Start by laying out the vinyl planks in the desired pattern, beginning in a corner of the room. Use spacers to ensure even spacing between the planks. Dry fit the planks without adhesive to visualize the overall layout and identify any necessary cuts.

3. Adhesive Application

Apply the adhesive to the subfloor using a notched trowel following the manufacturer's instructions. Work in small sections to prevent the adhesive from drying out before you can place the planks.

4. Plank Installation

Firmly press the first plank into the adhesive, ensuring it is level and aligned with the layout. Continue installing subsequent planks, carefully aligning the edges and tapping them together using a tapping block and hammer. Stagger the end joints to minimize visible seams.

5. Cutting and Fitting

For obstacles like walls or corners, measure and mark the planks accordingly, then use a utility knife or circular saw to make precise cuts. Carefully fit the cut planks into the space, ensuring a snug fit.

6. Transitions and Trim

Install transitions where the flooring meets other surfaces, such as doorways or from one room to another. Use trim moldings around the perimeter of the room to conceal expansion gaps and provide a polished finish.

7. Curing and Maintenance

Allow 24 hours for the adhesive to cure properly. Restrict foot traffic during this time. Once cured, clean the floor as per the manufacturer's recommendations to maintain its pristine condition.

Tips for Success:

Use a level to ensure the subfloor is flat.
Wear gloves when handling the adhesive.
Allow the planks to acclimate for at least 24 hours.
Start in a corner and work your way out.
Double-check alignment and spacing before tapping the planks together.
Use a clean cloth to wipe away excess adhesive.

By following these steps carefully, you can enjoy a stunning and durable Trafficmaster Allure Ultra Vinyl Plank Flooring that will enhance your home for years to come.