How To Install Sheet Vinyl Flooring On Plywood

How to Install Sheet Vinyl Flooring on Plywood

Sheet vinyl flooring is a great choice for those looking for a durable, waterproof, and easy-to-clean flooring option. It is also relatively easy to install, making it a good choice for DIYers. Here are the steps on how to install sheet vinyl flooring on plywood:

1. Prepare the subfloor

The first step is to prepare the subfloor. The subfloor should be smooth, level, and free of any debris. If the subfloor is not level, you can use a self-leveling compound to level it out. Once the subfloor is level, you can apply a layer of underlayment. Underlayment helps to reduce noise and insulate the floor.

2. Measure and cut the vinyl

Once the subfloor is prepared, you can measure and cut the vinyl. Measure the length and width of the room, and then add an extra 6 inches to each measurement. This will give you enough vinyl to overlap the edges of the room. Once you have measured the vinyl, you can cut it using a utility knife.

3. Install the vinyl

Once the vinyl is cut, you can install it. Start by placing the vinyl in the center of the room. Then, use a trowel to apply a thin layer of adhesive to the subfloor. Once the adhesive is applied, you can press the vinyl into place. Use a roller to smooth out the vinyl and remove any air bubbles.

4. Trim the edges

Once the vinyl is installed, you can trim the edges. Use a utility knife to trim the excess vinyl around the edges of the room. You can also use a caulk gun to fill in any gaps between the vinyl and the wall.

5. Install the baseboards

The final step is to install the baseboards. Baseboards help to cover the expansion gap between the vinyl and the wall. You can use a nail gun to install the baseboards.

Installing sheet vinyl flooring on plywood is a relatively easy process. By following these steps, you can install a beautiful and durable floor that will last for years to come.