How To Install Flooring Under Door Jambs

Installing flooring under door jambs can be a tricky task, but it's essential to get it right in order to ensure a professional-looking finish. Here are the steps you need to follow:

1. Remove the door jamb. Using a pry bar, carefully pry the door jamb away from the flooring. Be careful not to damage the jamb or the flooring.

2. Measure and cut the flooring. Measure the width of the opening under the door jamb and cut a piece of flooring to that width. The length of the flooring should be long enough to extend under the jamb by at least 1 inch.

3. Apply adhesive to the flooring. Apply a bead of construction adhesive to the bottom of the flooring, along the edge that will be under the jamb.

4. Slide the flooring under the jamb. Carefully slide the flooring under the door jamb, making sure that the adhesive side is facing up. Press down on the flooring to secure it in place.

5. Reinstall the door jamb. Once the flooring is in place, reinstall the door jamb. Make sure that the jamb is flush with the flooring and that there are no gaps.

6. Fill any gaps. If there are any gaps between the flooring and the jamb, fill them with caulk. This will help to seal out moisture and prevent drafts.

By following these steps, you can easily install flooring under door jambs and achieve a professional-looking finish.