How To Install Coreluxe Rigid Vinyl Plank Flooring

Coreluxe Rigid Vinyl Plank Flooring Installation Guide

Coreluxe rigid vinyl plank flooring is a durable and beautiful flooring option that can be installed in a variety of spaces. It is easy to maintain and can withstand heavy traffic, making it a great choice for homes with children or pets. ### Tools and Materials You'll Need - Coreluxe rigid vinyl planks - Underlayment (optional) - Measuring tape - Utility knife - Tapping block - Spacer wedges - Safety glasses - Dust mask ### Step 1: Prepare the Subfloor The subfloor must be clean, dry, flat, and level. Any unevenness or debris can cause the planks to buckle or warp. If necessary, use a leveler to smooth out any uneven areas. ### Step 2: Install the Underlayment (Optional) Underlayment provides additional cushioning and soundproofing. If you are installing the flooring in a room where noise is a concern, you may want to consider using underlayment. To install the underlayment, simply roll it out over the subfloor and overlap the seams by 2 inches. Tape the seams together with duct tape. ### Step 3: Install the First Row of Planks Start by measuring the width of the room and dividing it by the width of the planks. This will tell you how many full planks you need to install in the first row. Cut the first plank to fit the width of the room and insert it into the far corner of the room. Leave a 1/4-inch gap between the plank and the wall for expansion. ### Step 4: Install the Remaining Rows Continue installing the planks by clicking them together. Use a tapping block to gently tap the planks into place. Be sure to keep the planks aligned and level. As you reach the end of each row, cut the last plank to fit and insert it into place. ### Step 5: Install the Last Row The last row of planks may need to be cut to fit. Measure the remaining width of the room and cut the planks to the appropriate size. Gently tap the planks into place, leaving a 1/4-inch gap between the planks and the wall for expansion. ### Step 6: Trim the Edges Once the flooring is installed, you will need to trim the edges of the planks around the walls, door frames, and other obstacles. Use a utility knife to score the planks along the edges and then snap them off. ### Step 7: Clean the Floor Once the flooring is installed, clean it with a damp mop. Avoid using harsh chemicals or cleaners, as these can damage the flooring. ### Tips for Success - Always follow the manufacturer's instructions for installation. - Use a tapping block to gently tap the planks into place. Do not hammer the planks, as this can damage them. - Leave a 1/4-inch gap between the planks and the walls for expansion. - Trim the edges of the planks around the walls, door frames, and other obstacles with a utility knife. - Clean the floor with a damp mop once the installation is complete.

Diy Coreluxe Rigid Vinyl Plank Tips

Diy How To Corelux Vinyl Installation Tips And Tricks Lumber Liquidators Lvp Plank Flooring Install

Rigid Core Luxury Vinyl Plank Flooring Installation

How To Install Vinyl Plank Flooring Coreluxe Urban Loft Ash Tips And Tricks

Coreluxe 5mm W Pad Milner Pass Oak Waterproof Rigid Vinyl Plank Flooring 5 75 In Wide X 48 Long Ll

Revolutionize Your Home With Top 2024 S Most Liked And Budget Friendly Lvp Flooring Ll Edition Chicago Floorecki Llc Installation Hardwood Floors Floor Installations Repairs