How To Cut Vinyl Plank Flooring Around Toilet

Installing vinyl plank flooring can be a rewarding DIY project, but when you encounter obstacles like toilets, you may need to make precise cuts to ensure a seamless and professional-looking finish. Cutting vinyl plank flooring around a toilet requires careful planning, the right tools, and a bit of patience. Here's a step-by-step guide to help you tackle this task effortlessly:

Materials Required:

Vinyl plank flooring
Measuring tape
Pencil or marking tool
Utility knife
Straight edge or ruler
Pry bar or chisel

Step 1: Measure and Mark

Start by measuring the distance from the edge of the toilet flange (the base where the toilet connects to the floor) to the wall. Mark this measurement on the vinyl plank using a pencil or marking tool.

Step 2: Cut the Plank

Using a sharp utility knife, carefully cut along the marked line. Hold the straight edge or ruler firmly against the line to ensure a straight cut. Cut through the entire thickness of the vinyl plank.

Step 3: Remove Excess Vinyl

Once the plank is cut, use a pry bar or chisel to gently remove the excess vinyl around the toilet flange. Be careful not to damage the subfloor or the existing vinyl flooring.

Step 4: Test Fit

Place the cut plank against the toilet flange and make sure it fits snugly. It should go around the flange without any gaps or overlaps. If necessary, adjust the cut slightly until it fits perfectly.

Step 5: Secure the Plank

Apply adhesive to the bottom of the vinyl plank and press it firmly into place around the toilet flange. Use a weight or clamp to hold it securely while the adhesive dries.

Step 6: Install the Toilet

Once the adhesive is dry, you can reinstall the toilet. Make sure the toilet flange is level and that the bolts are tightened properly to prevent any leaks.

Tips:

Use a sharp utility knife to ensure clean cuts.
Measure twice, cut once to avoid mistakes.
If the cut is not perfect, you can use caulk or cove base to cover any small gaps.
Be patient and take your time to achieve the best results.

Cutting vinyl plank flooring around a toilet may seem daunting at first, but with the proper technique and tools, it can be a manageable task. By following these steps carefully, you can create a seamless and professional-looking transition between your flooring and the toilet.