How To Cut Laminate Floor Boards

How to Cut Laminate Floor Boards

Laminate flooring is a popular choice for homeowners because it is durable, affordable, and easy to install. However, one of the most challenging aspects of installing laminate flooring is cutting the boards. If you cut the boards incorrectly, you can end up with gaps or uneven seams. In this article, we will provide you with a step-by-step guide on how to cut laminate floor boards.

Materials You Will Need

Laminate floor boards
Measuring tape
Pencil
Circular saw or jigsaw
Safety glasses
Ear protection

Step-by-Step Guide

Measure the area you want to cut. Use a measuring tape to determine the length and width of the area you want to cut. Mark the measurements on the laminate floor board with a pencil.
Set up your saw. If you are using a circular saw, make sure the blade is sharp and set to the correct depth. If you are using a jigsaw, make sure the blade is sharp and the correct size for the thickness of the laminate floor board.
Position the laminate floor board. Place the laminate floor board on a flat surface, with the side you want to cut facing up. Align the pencil marks with the edge of the saw.
Cut the laminate floor board. Slowly and carefully cut the laminate floor board, following the pencil marks. Be sure to apply even pressure to the saw and keep the blade straight.
Sand the cut edge. Once you have made the cut, sand the cut edge of the laminate floor board with a fine-grit sandpaper. This will help to smooth out any rough edges and prevent the laminate from chipping.

Tips

Use a sharp blade. A dull blade will tear the laminate and make it difficult to get a clean cut.
Cut slowly and carefully. Rushing will increase the chances of making a mistake.
Use a straightedge or guide to help you make a straight cut.
Wear safety glasses and ear protection when cutting laminate flooring.
Practice on a scrap piece of laminate before cutting the actual flooring.