Allure Vinyl Flooring Installation Instructions

Essential Aspects of Allure Vinyl Flooring Installation Instructions

Installing Allure vinyl flooring can be a simple and rewarding home improvement project with the right preparation and attention to detail. Here are some essential aspects of Allure vinyl flooring installation instructions to ensure a successful outcome:

Subfloor Preparation

A stable and level subfloor is crucial for a successful vinyl flooring installation. Ensure the subfloor is flat within 1/8 inch over 6 feet and free from moisture, cracks, or unevenness. Clean the subfloor thoroughly to remove any dirt or debris.

Acclimation

Allure vinyl flooring needs time to acclimate to the temperature and humidity of the room where it will be installed. Unbox the planks and let them lie flat in the room for at least 24 hours before installation. This helps prevent buckling or warping.

Installing the First Row

Start by laying out the first row of planks perpendicular to the longest wall in the room. Use spacers to ensure a consistent gap around the perimeter of the room. Begin with a full plank at one end and cut the last plank to fit the space at the other end.

Locking the Planks

Allure planks feature a patented locking system that makes installation easy. Angle the tongue of one plank into the groove of the adjacent plank and gently tap down to lock it in place. Ensure the planks are aligned securely and that the joints are tight.

Staggering the Joints

To create a more natural look and prevent weak seams, stagger the joints between rows. The first plank of each row should be offset by half the length of a plank from the previous row. Use a measuring tape or a plank cutting jig to achieve precise offsets.

Cutting Planks

Use a sharp utility knife and a straight edge to cut planks to fit around obstacles or for the last row. Score the plank on the cutting line and snap it along the score. Sand any rough edges to ensure a smooth transition to the adjacent planks.

Expansion Gaps

Allure vinyl flooring expands and contracts with temperature fluctuations. Therefore, it's essential to leave expansion gaps around the perimeter of the room and around any fixed objects. Use spacers or molding to create a 1/4-inch gap.

Trimming the Excess

Once the flooring is installed, use a utility knife to trim any excess around the edges of the room. Insert the knife blade into the expansion gap and score the flooring along the wall or molding. Remove the excess material and install molding or baseboards to cover the expansion gap.