Allure Resilient Plank Flooring Installation Instructions

Allure Resilient Plank Flooring Installation Instructions: Essential Aspects

Installing Allure Resilient Plank Flooring can elevate the aesthetic appeal and functionality of your living space. Adhering to the proper installation instructions is crucial to ensure a flawless and durable flooring system. Here are the essential aspects of Allure Resilient Plank Flooring Installation Instructions to guide you through the process:

1. Preparation:

Clear the installation area of all furniture, fixtures, and debris.
Inspect the subfloor for levelness, flatness, and dryness. Repair any unevenness or moisture issues.
Install an underlayment to provide a moisture barrier and sound reduction.

2. Acclimation:

Bring the flooring planks into the installation area and let them acclimate to the temperature and humidity for at least 48 hours.
This helps minimize expansion and contraction issues after installation.

3. Installation:

Begin installation along the longest wall in the room, using a spacer to maintain a consistent gap around the perimeter.
Lock the planks together along the edges and ends using the built-in locking system.
Stagger the joints of the planks for a more uniform appearance.
Use a tapping block and hammer to seat the planks securely.

4. Cutting and Trimming:

For custom cuts, use a sharp utility knife or flooring saw.
Measure and mark the planks before cutting to avoid mistakes.
Use a transition strip or molding to finish the edges of the flooring.

5. Finishing:

Once the installation is complete, remove the spacers and clean the floor thoroughly.
Install baseboards or quarter-round molding around the perimeter of the room.
Enjoy your new Allure Resilient Plank Flooring!

By following these essential aspects of installation, you can achieve a beautiful and durable flooring system that will add value and charm to your home. Remember to consult the manufacturer's warranty and maintenance guidelines for ongoing care and upkeep.