How To Install Reclaimed Parquet Flooring

How to Install Reclaimed Parquet Flooring

Reclaimed parquet flooring adds a touch of rustic charm and historical character to any space. Installing it requires careful planning and execution, but the result is a beautiful and durable floor that will last for years to come.

Materials You'll Need

Reclaimed parquet flooring
Underlayment
Adhesive
Hammer
Nails
Chalk line
Level
Tape measure

Step 1: Prepare the Subfloor

Before installing the parquet flooring, you must ensure the subfloor is level, dry, and free of any debris. If necessary, level the subfloor using a self-leveling compound or plywood.

Step 2: Install the Underlayment

Underlayment helps absorb sound and protect the parquet flooring from moisture. Roll out the underlayment and secure it to the subfloor using adhesive or staples.

Step 3: Lay Out the Parquet Flooring

Determine the starting point for the flooring and snap a chalk line perpendicular to the wall. Start laying the parquet tiles along the chalk line, using adhesive to secure them to the underlayment.

Step 4: Nail Down the Parquet Flooring

Once the tiles are in place, nail them down using a hammer and nails. Drive the nails through the parquet flooring and into the underlayment at a slight angle.

Step 5: Fill in the Gaps and Sand the Floor

Use wood filler to fill in any gaps between the tiles. Allow the filler to dry completely before sanding the floor with a fine-grit sandpaper to create a smooth and even surface.

Step 6: Apply Finish

Finally, apply a sealant or polyurethane finish to protect the floor and enhance its beauty. Allow the finish to dry according to the manufacturer's instructions.

By following these steps, you can successfully install reclaimed parquet flooring and enjoy its timeless appeal for many years to come.