How To Install Stick On Vinyl Plank Flooring

These days, DIY flooring is more popular than ever. One of the most popular DIY flooring options is stick-on vinyl plank flooring. It is easy to install and requires no special tools or skills. In this article, we will provide step-by-step instructions on how to install stick-on vinyl plank flooring.

Materials you will need:

Stick-on vinyl plank flooring
Measuring tape
Pencil
Utility knife
Straight edge
Tapping block
Caulk gun
Caulk

Step-by-step instructions:

Step 1: Prepare the subfloor

The first step is to prepare the subfloor. The subfloor must be clean, dry, and level. If the subfloor is not level, you will need to level it using a self-leveling compound.

Step 2: Measure and cut the planks

Next, you need to measure and cut the planks. Measure the length and width of the room and add 10% for waste. Cut the planks to the desired length using a utility knife and a straight edge.

Step 3: Install the planks

Now, you can start installing the planks. Start in the corner of the room and work your way out. Peel off the backing of the plank and stick it to the subfloor. Use a tapping block to tap the planks into place.

Step 4: Caulking

Once all of the planks are installed, you need to caulk the seams. Apply a bead of caulk to the seams between the planks and smooth it out with your finger. This will help to seal the seams and prevent water from seeping through.

Step 5: Finishing

The final step is to finish the installation. You can add baseboards or molding to the edges of the floor. You can also add a rug or carpet to the floor for added comfort.

Tips:

Make sure the subfloor is clean, dry, and level before you start installing the planks.
Measure and cut the planks carefully to ensure a good fit.
Use a tapping block to tap the planks into place.
Caulk the seams between the planks to prevent water from seeping through.
Add baseboards or molding to the edges of the floor for a finished look.