How To Install Allure Vinyl Plank Flooring On Concrete

Installing Allure vinyl plank flooring on concrete is a relatively easy DIY project. By following these step-by-step instructions, you can achieve a professional-looking finish.

Materials You'll Need:
- Allure vinyl plank flooring - Concrete primer - Notched trowel - Thin-set mortar - Spacers - Utility knife - Tape measure - Chalk line - Safety glasses and gloves

Step 1: Prepare the Concrete
Clean the concrete thoroughly, removing any dirt, dust, or debris. Fill any cracks or holes with a concrete patching compound and allow it to dry. Apply a coat of concrete primer to help the thin-set mortar bond with the concrete.

Step 2: Plan the Layout
Measure the room and determine where the planks will be placed. Start from the center of the room and work your way out. Use a chalk line to snap a line to guide the installation of the first row.

Step 3: Apply the Thin-Set Mortar
Using a notched trowel, spread a thin layer of thin-set mortar onto the concrete surface. Be sure to follow the manufacturer's instructions for mixing and applying the thin-set.

Step 4: Lay the First Row of Planks
Place the first plank along the chalk line and press it firmly into the thin-set mortar. Use spacers to ensure equal spacing between the planks. Continue laying the first row, making sure to stagger the joints between the planks.

Step 5: Continue Installing the Planks
Once the first row is complete, start the second row. Insert the end of the first plank in the second row into the locking mechanism of the last plank in the first row. Press the plank down firmly until it locks into place. Continue laying the planks in this manner, alternating the starting plank in each row.

Step 6: Cut and Fit the Planks
Measure and mark the planks to fit around obstacles such as doorways and walls. Use a utility knife to cut the planks. Be sure to wear safety glasses and gloves when cutting the planks.

Step 7: Finishing
Once the planks are all installed, remove the spacers and vacuum the floor. You can also install quarter-round molding or baseboards around the perimeter of the floor for a finished look.