Bellawood Prefinished Hardwood Flooring Installation Instructions

Bellawood prefinished hardwood flooring is a popular choice for homeowners due to its durability, beauty, and ease of maintenance. If you're planning to install Bellawood flooring yourself, it's important to follow the manufacturer's instructions carefully to ensure a successful installation.

Step 1: Preparation

Before you begin the installation, you need to prepare the subfloor. The subfloor should be smooth, flat, and dry. If the subfloor is uneven, you may need to level it using a self-leveling compound. You should also remove any existing flooring, baseboards, and moldings.

Step 2: Acclimation

Once the subfloor is prepared, you need to acclimate the Bellawood flooring to the room where it will be installed. This means allowing the flooring to sit in the room for at least 48 hours before you begin the installation. This will help the flooring to adjust to the temperature and humidity of the room, which will reduce the risk of buckling or warping.

Step 3: Installation

The Bellawood flooring can be installed using either a nail or glue-down method. If you're using the nail method, you will need to use a flooring nailer to drive nails through the tongue and groove of the flooring. If you're using the glue-down method, you will need to apply a construction adhesive to the subfloor and then press the flooring into place.

Step 4: Finishing

Once the flooring is installed, you need to finish it with a sealant. The sealant will help to protect the flooring from wear and tear. You can choose from a variety of sealants, including polyurethane, water-based polyurethane, and oil-based polyurethane.