How To Install Vinyl Stick On Flooring

How to Install Vinyl Stick-On Flooring

Installing vinyl stick-on flooring is a relatively simple and affordable DIY project that can transform the look of your home. The planks are easy to cut and install, and they can be placed over most existing flooring types.

Materials You'll Need

Vinyl stick-on flooring
Utility knife
T-square or straight edge
Tape measure
Level
Adhesive (if needed)

Preparation

Before you begin installing the flooring, you need to prepare the subfloor. The subfloor should be clean, dry, and level. If the subfloor is not level, you will need to level it using a self-leveling compound.

Once the subfloor is prepared, you need to lay out the flooring planks. Start by measuring the length and width of the room. Then, divide the length of the room by the width of the planks to determine how many planks you will need. Cut the planks to the desired length using a utility knife.

Installation

To install the flooring, simply peel off the backing of a plank and place it on the subfloor. Use a level to ensure that the plank is level. Continue installing the planks in this manner until the entire floor is covered.

If you need to make a cut in the flooring, use a utility knife. Score the flooring along the desired cut line, then snap the flooring along the score line.

Finishing Touches

Once the flooring is installed, you can add finishing touches such as baseboards and quarter-round molding. Baseboards will help to hide the expansion gap between the flooring and the wall. Quarter-round molding will help to hide the expansion gap between the flooring and the baseboards.

Vinyl stick-on flooring is a great way to update the look of your home without breaking the bank. With a little bit of time and effort, you can install vinyl stick-on flooring that will last for years to come.