How To Install Ez Plank Laminate Flooring

How to Install Ez Plank Laminate Flooring

Installing Ez Plank laminate flooring is a relatively straightforward process that can be completed in a few hours. However, there are a few essential steps that you must follow to ensure a successful installation.

Before you begin, you will need to gather the following tools and materials:

Ez Plank laminate flooring
Underlayment
Tape measure
Pencil
Saw
Hammer
Pry bar
Spacers
Moldings (optional)

Once you have gathered your tools and materials, you can begin the installation process.

1. Prepare the Subfloor

The first step is to prepare the subfloor. The subfloor must be level, smooth, and dry. If the subfloor is not level, you will need to level it using a self-leveling compound. If the subfloor is not smooth, you will need to sand it down. And if the subfloor is not dry, you will need to allow it to dry completely before proceeding.

2. Install the Underlayment

Once the subfloor is prepared, you can install the underlayment. The underlayment will help to protect the laminate flooring from moisture and will also provide a cushion for the flooring. The underlayment should be rolled out over the subfloor and taped together at the seams.

3. Install the First Row of Ez Plank Laminate Flooring

The first row of Ez Plank laminate flooring should be installed along the longest wall in the room. Start by measuring the length of the wall and cutting the first plank to the appropriate length. Then, place the plank in the corner of the room and tap it into place using a hammer. Continue installing the first row of planks by tapping them together end-to-end.

4. Install the Remaining Rows of Ez Plank Laminate Flooring

Once the first row of planks is installed, you can begin installing the remaining rows. Start by measuring the length of the second row of planks and cutting the planks to the appropriate length. Then, place the first plank in the second row next to the last plank in the first row and tap it into place. Continue installing the second row of planks by tapping them together end-to-end.

Continue installing the remaining rows of planks in the same manner as the first and second rows. Be sure to stagger the joints between the planks to create a more stable floor.

5. Install the Moldings (Optional)

Once all of the planks have been installed, you can install the moldings. The moldings will help to cover the expansion gap around the edges of the floor and will also give the floor a finished look. The moldings can be installed using a nail gun or a hammer and nails.

Congratulations! You have now successfully installed Ez Plank laminate flooring. Enjoy your new floor!