How Do You Put Vinyl Plank Flooring On Stairs

How to Install Vinyl Plank Flooring on Stairs

Installing vinyl plank flooring on stairs is a fairly straightforward process, but there are a few key steps you need to follow to ensure a professional-looking finish. Here's a step-by-step guide to help you get the job done:

Step 1: Prepare the Stairs

The first step is to prepare the stairs by removing any existing flooring and cleaning the surface. Make sure the stairs are level and free of any debris. If there are any gaps or holes, fill them in with a caulk or wood filler.

Step 2: Determine the Tread Size

Next, you need to determine the size of the treads. Measure the width of the stairs and divide it by the width of the vinyl planks. This will give you the number of planks you need for each tread.

Step 3: Cut the Vinyl Planks

Once you know the size of the treads, you can start cutting the vinyl planks. Use a sharp utility knife to score the planks along the length and then snap them in half. Make sure the cuts are clean and precise.

Step 4: Install the Starter Tread

The first tread you install is called the starter tread. This tread will serve as the foundation for the rest of the stairs. Apply a bead of construction adhesive to the back of the starter tread and place it on the bottom step. Use a level to make sure the tread is level and secure it in place with nails or screws.

Step 5: Install the Remaining Treads

Once the starter tread is installed, you can start installing the remaining treads. Apply a bead of construction adhesive to the back of each tread and place it on the next step. Use a level to make sure the tread is level and secure it in place with nails or screws.

Step 6: Install the Risers (Optional)

If you want to install risers on your stairs, you can do so after the treads are in place. Risers are vertical pieces that cover the space between the treads. To install a riser, apply a bead of construction adhesive to the back of the riser and place it on the front of the step. Secure it in place with nails or screws.

Step 7: Install the Trim

The final step is to install the trim. Trim is used to cover the edges of the stairs and give them a finished look. Apply a bead of construction adhesive to the back of the trim and place it around the edges of the stairs. Secure it in place with nails or screws.