How To Install Vinyl Plank Flooring On Plywood

Vinyl plank flooring is a popular choice for homeowners because it is durable, easy to clean, and affordable. It can also be installed on a variety of subfloors, including plywood. If you are planning to install vinyl plank flooring on plywood, there are a few things you need to do to prepare the subfloor and ensure a successful installation.

1. Prepare the plywood subfloor

The first step is to prepare the plywood subfloor. This involves making sure that the subfloor is level, smooth, and free of any debris. You can do this by using a level to check for any uneven areas and then sanding down any high spots. You should also clean the subfloor thoroughly with a vacuum cleaner or broom to remove any dust or dirt.

2. Install an underlayment

Once the subfloor is prepared, you need to install an underlayment. An underlayment is a thin layer of material that is placed between the subfloor and the vinyl plank flooring. It helps to protect the vinyl plank flooring from moisture and sound, and it can also help to improve the comfort and performance of the flooring.

3. Install the vinyl plank flooring

Once the underlayment is installed, you can begin installing the vinyl plank flooring. Start by measuring the room and determining how many planks you will need. Then, cut the planks to size and start laying them down. Be sure to stagger the joints between the planks and use a tapping block to help secure them in place.

4. Finish the installation

Once all of the vinyl plank flooring is installed, you need to finish the installation by trimming any excess flooring around the edges of the room and installing baseboards or moldings to cover the gaps between the flooring and the walls.

Tips for installing vinyl plank flooring on plywood

Here are a few tips for installing vinyl plank flooring on plywood:

Use a sharp knife to cut the vinyl plank flooring. A dull knife will tear the flooring and make it difficult to install.
Be sure to stagger the joints between the planks. This will help to prevent the flooring from buckling or warping.
Use a tapping block to help secure the planks in place. A tapping block is a small block of wood or plastic that is used to tap the planks into place.
Allow the flooring to acclimate to the room temperature for 24 hours before installing it. This will help to prevent the flooring from expanding or contracting after it is installed.