Installing Lifeproof Vinyl Plank Flooring On Concrete

Step-by-Step Guide to Installing Lifeproof Vinyl Plank Flooring on Concrete

Installing Lifeproof vinyl plank flooring on concrete is a relatively straightforward process that can be completed in a weekend. By following these step-by-step instructions, you can achieve a professional-looking and durable floor that will last for years to come.

1. Preparation

Materials you'll need:
- Lifeproof vinyl plank flooring
- Underlayment
- Measuring tape
- Utility knife
- Spacers
- Tapping block
- Circular saw or miter saw (if necessary)

Concrete preparation:
Before you begin installing the flooring, it's important to prepare the concrete surface. The concrete should be clean, dry, and level. Any cracks or holes should be filled and repaired.

Laying the underlayment:
Once the concrete is prepared, you can lay down the underlayment. The underlayment will help to reduce noise and add comfort underfoot. Start by rolling out the underlayment and cutting it to fit the room.

2. Installation

Starting the first row:
Begin installing the flooring by placing a spacer along one wall. This will create a gap between the wall and the flooring, which will allow for expansion and contraction. Place the first plank against the spacer and tap it into place using a tapping block.

Continuing the installation:
Continue installing the flooring by snapping the planks together. Use a tapping block to ensure that the planks are securely connected. Stagger the joints between the planks to create a more natural look.

Fitting around obstacles:
When you encounter obstacles such as doorways or pipes, you will need to cut the planks to fit. Use a utility knife or a circular saw to make the cuts. Be sure to measure carefully to ensure a precise fit.

3. Finishing Touches

Installing the trim:
Once the flooring is installed, you can install the trim. The trim will help to hide the expansion gap and give the floor a finished look. Use a miter saw to cut the trim to fit and secure it in place with nails or glue.

Cleaning the floor:
After the flooring is installed, it's important to clean it thoroughly. Use a damp mop and a mild cleaning solution to remove any dirt or debris. Avoid using harsh chemicals or abrasive cleaners, as they can damage the floor.