Allen Roth Laminate Flooring Installation

Essential Aspects of Allen Roth Laminate Flooring Installation

Installing Allen Roth laminate flooring can be a rewarding home improvement project, adding beauty and durability to your living space. Here's a comprehensive guide to help you prepare and execute a successful installation:

Pre-Installation Preparation

Ensure that your subfloor meets the manufacturer's recommendations. It should be level, dry, and free from any irregularities. Allow the flooring to acclimate to your home's environment for at least 48 hours prior to installation.

Tools and Materials Required

Gather all necessary tools and materials, including:

Laminate flooring planks
Underlayment (if needed)
Tapping block or pull bar
Circular saw or other cutting tool
Spacers
Measuring tape
Pencil
Vapor barrier (if necessary)

Installation Procedure

Install the Underlayment (Optional): If required, lay down the underlayment over the subfloor, overlapping seams and securing them with tape.
Start in a Corner: Begin installing the planks in a corner of the room, leaving a small gap around the perimeter for expansion.
Lock and Tap: Position each plank alongside the previous one, ensuring a tight fit. Use a tapping block or pull bar to lock the planks together.
Cut to Fit: Measure and cut the planks to fit around obstacles or the perimeter of the room. Use a sharp saw to ensure clean cuts.
Continue Laying: Continue laying the planks, alternating rows to create a staggered pattern. Tap each plank securely into place.
Last Row: Measure and cut the final row of planks to fit the width of the room. Use spacers to ensure equal gaps around the perimeter.
Trim and Install Moldings: Install baseboards, moldings, or transition strips around the perimeter of the flooring to conceal the expansion gap and create a finished look.

Tips for a Successful Installation

Lay out the planks before installation to get a sense of the pattern and minimize cutting waste.
Use spacers around the perimeter and in between each plank to ensure even expansion and prevent buckling.
Tap the planks together firmly but gently, avoiding excessive force that can damage the locks.
Clean up any dust or debris from the surface of the flooring as you work.
Protect the flooring from heavy traffic or furniture for at least 24 hours after installation.