How To Cut Laminate Flooring Around Closet Doors

How to Cut Laminate Flooring Around Closet Doors

Installing laminate flooring around closet doors can be a bit tricky, but with the right tools and a little patience, it's definitely doable. Here's a step-by-step guide to help you get the job done right:

1. Measure and mark the area to be cut. Use a measuring tape to measure the width of the closet door opening. Add 1/2 inch to the measurement and mark the line on the laminate flooring.

2. Score the laminate flooring. Use a utility knife to score the laminate flooring along the marked line. Be sure to score through the top layer of the flooring only. Do not cut all the way through the backing.

3. Snap the laminate flooring. Once the laminate flooring is scored, use a utility knife to snap the flooring along the score line. Be careful not to apply too much pressure, or the flooring may crack.

4. Cut the backing. Use a utility knife to cut the backing of the laminate flooring along the score line. Be sure to cut all the way through the backing.

5. Remove the cut piece of laminate flooring. Once the backing is cut, you can remove the cut piece of laminate flooring. Be careful not to damage the adjacent flooring.

6. Install the laminate flooring around the closet door. Once the cut piece of laminate flooring is removed, you can install the remaining flooring around the closet door. Be sure to use spacers to ensure that the flooring is properly spaced.

7. Trim the excess laminate flooring. Once the laminate flooring is installed, you can trim any excess flooring around the closet door. Use a utility knife to trim the flooring flush with the door frame.

8. Caulk the gaps. Once the laminate flooring is trimmed, you can caulk the gaps between the flooring and the door frame. This will help to seal the flooring and prevent water damage.

With a little patience, you can easily install laminate flooring around closet doors. Just follow these steps and you'll be finished in no time.