How To Install Rubber Coin Flooring In Trailer

How to Install Rubber Coin Flooring in a Trailer

Installing rubber coin flooring in a trailer is a relatively simple process that can be completed in a few hours. However, there are a few essential steps that must be followed to ensure a successful installation.

1. Preparation

Before you begin, you will need to gather the following materials:

Rubber coin flooring
Adhesive
Notched trowel
Tape measure
Utility knife
Tapping block

Once you have your materials, you will need to prepare the floor of your trailer. This involves cleaning the floor thoroughly and removing any dirt or debris. You will also need to make sure that the floor is level and smooth. If the floor is not level, you may need to use a self-leveling compound to smooth it out.

2. Applying the Adhesive

Once the floor is prepared, you can begin applying the adhesive. Use a notched trowel to apply the adhesive to the floor in a thin, even layer. Be sure to follow the manufacturer's instructions for the specific type of adhesive you are using.

3. Installing the Flooring

Once the adhesive has been applied, you can begin installing the flooring. Start by placing the first tile in the corner of the room. Press the tile firmly into the adhesive and use a tapping block to ensure that it is securely in place.

Continue installing the tiles in rows, working your way across the room. Be sure to stagger the joints between the tiles to create a strong bond. As you install the tiles, use a utility knife to trim any excess material around the edges.

4. Finishing Touches

Once all of the tiles have been installed, you can finish the installation by applying a sealant to the joints. This will help to protect the flooring from moisture and wear.

Your new rubber coin flooring is now installed and ready to use. Enjoy the comfort and durability of this flooring for years to come.