How To Cut Through Laminate Flooring Already Installed

How to Cut Through Laminate Flooring Already Installed

Laminate flooring is a popular choice for homeowners because it's durable, easy to maintain, and relatively inexpensive. However, if you need to make a cut in laminate flooring that's already installed, it can be a bit tricky. Here are a few tips on how to do it:

1. Use a sharp blade

The most important thing when cutting laminate flooring is to use a sharp blade. A dull blade will tear the laminate and make a ragged cut. You can use a utility knife or a circular saw with a fine-tooth blade.

2. Score the laminate

Before you make the cut, it's important to score the laminate. This will help to prevent the laminate from chipping or splintering.

To score the laminate, use a utility knife to make a shallow cut along the line where you want to cut. Be sure to apply enough pressure to cut through the laminate, but not so much that you cut all the way through.

3. Cut the laminate

Once you have scored the laminate, you can make the cut. If you're using a utility knife, simply follow the score line you made earlier. If you're using a circular saw, be sure to use a fine-tooth blade and to cut slowly and carefully.

4. Clean up the cut

Once you have made the cut, it's important to clean up the edges. You can use a sanding block or a sanding sponge to smooth the edges of the cut. Be sure to remove all of the dust and debris.

5. Seal the cut

Once you have cleaned up the cut, it's important to seal it. This will help to protect the cut from moisture and wear and tear.

You can use a clear silicone sealant or a laminate flooring sealant. Apply the sealant to the edges of the cut and allow it to dry completely.

Cutting through laminate flooring that's already installed can be a bit tricky, but it's definitely possible with the right tools and techniques. By following these tips, you can make a clean and precise cut that will look great.