How To Glue Down Engineered Wood Flooring Over Concrete

How to Glue Down Engineered Wood Flooring Over Concrete

Gluing down engineered wood flooring over concrete is a relatively straightforward process that can be completed in a few hours. However, there are a few essential aspects to keep in mind to ensure a successful installation.

1. Surface Preparation

The first step is to prepare the concrete surface by making sure it is clean, level, and dry. Any dirt, debris, or moisture will interfere with the adhesion of the glue. If the concrete is not level, you will need to level it using a self-leveling compound.

2. Choosing the Right Glue

There are a few different types of glue that can be used to install engineered wood flooring over concrete. The best type of glue to use will depend on the type of flooring and the concrete surface. For most applications, a polyurethane-based glue will work well. It offers strong adhesion, is moisture-resistant, and has a long open time, which gives you plenty of time to adjust the flooring before it sets.

3. Applying the Glue

Once the surface is prepared and the glue has been selected, it is time to apply the glue to the concrete. Use a notched trowel to spread the glue evenly over the surface. Be sure to apply enough glue so that the entire back of the flooring plank will be covered.

4. Installing the Flooring

Once the glue has been applied, it is time to install the flooring. Start by placing the first plank in the corner of the room and work your way out. Be sure to stagger the joints of the planks for added strength. As you install each plank, press it firmly into the glue and use a tapping block to ensure that it is fully seated.

5. Finishing Touches

Once the flooring has been installed, it is important to let the glue dry completely before walking on it. This will typically take 24-48 hours. Once the glue has dried, you can trim the edges of the flooring and install baseboards to complete the installation.

Gluing down engineered wood flooring over concrete is a relatively easy project that can be completed in a few hours. By following these simple steps, you can ensure a successful installation that will last for years to come.